adjuster seals

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
User avatar
1954cooter
420 crawler
420 crawler
Posts: 45
Joined: Sat Oct 27, 2012 6:11 pm
Location: New Brunswick, Canada

adjuster seals

Post by 1954cooter » Tue Jun 26, 2018 10:13 am

My friend is working on his 1010 and needs the two seals that the track adjuster piston needs.
Seems there's a piston/plunger seal on the end of piston and a wiper seal in the housing.
Local JD dealer says they can't get them.Lavoy and others any ideas?

Thanks.
Cooter

User avatar
Lavoy
Site Admin
Site Admin
Posts: 9377
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Re: adjuster seals

Post by Lavoy » Tue Jun 26, 2018 1:26 pm

Two different styles, one leather, one is quad ring. I should have both on hand.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

User avatar
1954cooter
420 crawler
420 crawler
Posts: 45
Joined: Sat Oct 27, 2012 6:11 pm
Location: New Brunswick, Canada

Re: adjuster seals

Post by 1954cooter » Tue Jun 26, 2018 2:31 pm

Thanks Lavoy,
seems that I read that there are different diameters?
Will get diameter anyway and will check on type of material used.
The wiper seals are all the same?

thanks,
Cooter

User avatar
Lavoy
Site Admin
Site Admin
Posts: 9377
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Re: adjuster seals

Post by Lavoy » Wed Jun 27, 2018 1:42 pm

No difference in diameter on OEM. There are differences in wipers, but that is a serial number deal.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests