My friend is working on his 1010 and needs the two seals that the track adjuster piston needs.
Seems there's a piston/plunger seal on the end of piston and a wiper seal in the housing.
Local JD dealer says they can't get them.Lavoy and others any ideas?
Thanks.
Cooter
adjuster seals
- 1954cooter
- 430 crawler
- Posts: 52
- Joined: Sat Oct 27, 2012 6:11 pm
- Location: New Brunswick, Canada
Re: adjuster seals
Two different styles, one leather, one is quad ring. I should have both on hand.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
- 1954cooter
- 430 crawler
- Posts: 52
- Joined: Sat Oct 27, 2012 6:11 pm
- Location: New Brunswick, Canada
Re: adjuster seals
Thanks Lavoy,
seems that I read that there are different diameters?
Will get diameter anyway and will check on type of material used.
The wiper seals are all the same?
thanks,
Cooter
seems that I read that there are different diameters?
Will get diameter anyway and will check on type of material used.
The wiper seals are all the same?
thanks,
Cooter
Re: adjuster seals
No difference in diameter on OEM. There are differences in wipers, but that is a serial number deal.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Who is online
Users browsing this forum: No registered users and 145 guests