430 or 440IC

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
User avatar
DukeofDeere
1010 crawler
1010 crawler
Posts: 443
Joined: Wed Oct 26, 2011 7:12 am
Location: Hudsonville Michigan

430 or 440IC

Post by DukeofDeere » Mon Nov 19, 2018 7:05 am

Looking for a good dozer.
I’m not afraid of one needing repair.
An all hydraulic 6 way would be a bonus!

Thanks
Duke

User avatar
Stan Disbrow
350 crawler
350 crawler
Posts: 2894
Joined: Fri Jul 15, 2005 3:13 pm
Location: Raleigh, NC

Re: 430 or 440IC

Post by Stan Disbrow » Tue Nov 20, 2018 5:16 am

Hi,

PAT didn't show up until the 440 with the model 64 blade. 430 had the same model 62 manual blade the 420 had. Of course, there are a lot more 440 made so that part might just be automatic. I don't know if more 64 blades were made than 63 ones, though. PAT v manual.

Stan
There's No Such Thing As A Cheap Crawler!

Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10936
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Re: 430 or 440IC

Post by Lavoy » Tue Nov 20, 2018 10:25 am

I would assume manual 6 way would be more common just because people wouldn't spend the extra money for the 6 way. I have had way more manual blades than power.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 29 guests