Carb rebuild

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
gregmech
MC crawler
MC crawler
Posts: 5
Joined: Sun Sep 30, 2018 1:34 pm
Location: Alberta, Canada

Carb rebuild

Post by gregmech » Sun Nov 25, 2018 11:00 pm

I am looking for advice on rebuilding the carburetor on my 420. How should the outside be finished? Where they painted green from the factory? How do I keep the paint from sticking everything solid. Should I paint it and then install the parts? Thanks in advance, I have found lots of helpful information through this forum on many parts of my crawler.

Greg

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10937
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Re: Carb rebuild

Post by Lavoy » Mon Nov 26, 2018 2:13 pm

Carbs were painted from factory. I rebuild, them prime and paint, nothing sticks in any of the ones I have done.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

gregmech
MC crawler
MC crawler
Posts: 5
Joined: Sun Sep 30, 2018 1:34 pm
Location: Alberta, Canada

Re: Carb rebuild

Post by gregmech » Mon Nov 26, 2018 3:26 pm

Thanks Lavoy, I will follow that as well.
Greg

Post Reply

Who is online

Users browsing this forum: No registered users and 59 guests