Tracks 440

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
Jirving43
40C crawler
40C crawler
Posts: 24
Joined: Wed Jan 30, 2019 5:43 pm
Location: Wasilla, Ak

Tracks 440

Post by Jirving43 » Thu Feb 28, 2019 1:45 pm

So on my 440 I have 4 bolts per track pad. So I assume these chains are from something else? I've looked several times and don't seem to see a pin that's beveled or that has a c-clip indicating a master pin. Right sides gotta come off track adjuster needs new seal..

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10937
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Re: Tracks 440

Post by Lavoy » Thu Feb 28, 2019 2:57 pm

It is either 1010 or has been converted to 350 rails. 1010 rails would have a headed master pin, 350 could, but more likely a drive master pin. Look for a larger dimple in the end of one pin, can be hard to see.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

Post Reply

Who is online

Users browsing this forum: No registered users and 37 guests