1010 Dozer Blade

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
User avatar
Wilbur
420 crawler
420 crawler
Posts: 48
Joined: Sun Nov 06, 2016 5:09 pm
Location: Penn Run, Pennsylvania

1010 Dozer Blade

Post by Wilbur » Thu May 16, 2019 2:58 pm

What is this part called? Where can I find one? Will I go bankrupt paying for it?

This is not mine. Mine had been repaired but whoever welded it didn't do very good job. I repaired mine but it is not up to snuff. The wedges don't hold the blade. It will have to be done over.

Image
1959 440 icd 831 loader
1961 1010 dozer
1983 410B Hoe
450 C Dozer[/color]

Jim B
350 crawler
350 crawler
Posts: 2080
Joined: Sun Nov 05, 2017 11:36 am
Location: western Maine

Re: 1010 Dozer Blade

Post by Jim B » Thu May 16, 2019 4:56 pm

Check out the parts catalog for a 616 blade. I think this is the page showing your part (Item 22 - Lock, clamp, Part # U15553) https://partscatalog.deere.com/jdrc/sid ... pgId/97938 . As you likely already know or can guess JD says NLA from anything I found. Did you send Lavoy an email (postmaster@jdcrawlers.com) to see if he had any ideas? Hopefully someone here knows of a used one or a salvage yard that might have one.

User avatar
Stan Disbrow
350 crawler
350 crawler
Posts: 2894
Joined: Fri Jul 15, 2005 3:13 pm
Location: Raleigh, NC

Re: 1010 Dozer Blade

Post by Stan Disbrow » Fri May 17, 2019 4:12 am

Hi,

These are the things we tell folks they will never find one of when they bust one after making a power-angle-tilt conversion.

I think the only way to get one is by buying a parts machine. So, my first check would be with Lavoy. He has some parts machines.

Stan
There's No Such Thing As A Cheap Crawler!

Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10937
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Re: 1010 Dozer Blade

Post by Lavoy » Fri May 17, 2019 10:25 am

Difficult at best to find, impossible at worst because no one parts out blades. You sell one piece, and the blade is now junk and can't be sold. At one time I had a spare, but not sure it is that one, might have been from a 62 blade. I can check if you want.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

Jim B
350 crawler
350 crawler
Posts: 2080
Joined: Sun Nov 05, 2017 11:36 am
Location: western Maine

Re: 1010 Dozer Blade

Post by Jim B » Sun May 19, 2019 6:13 am

Good morning,

If you can't find one, and you likely plan on this, I would take the pieces to a good fab/machine shop and see if they could repair it or duplicate it in steel. It might be pricey but options appear limited.

Jim

Post Reply

Who is online

Users browsing this forum: No registered users and 43 guests