2010 cylinder plate

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
Jdmark2010c
MC crawler
MC crawler
Posts: 1
Joined: Sun Jun 02, 2019 11:27 am

2010 cylinder plate

Post by Jdmark2010c » Sun Jun 02, 2019 3:44 pm

Hello, I’m new and ennept. I have two 2010 sleeve plates. Only one seems to be good enough to use. My question, is it possible to over bore and use a larger piston? This is a 145 gasser.
Top
User avatar
DukeofDeere
1010 crawler
1010 crawler
Posts: 443
Joined: Wed Oct 26, 2011 7:12 am
Location: Hudsonville Michigan

Re: 2010 cylinder plate

Post by DukeofDeere » Sun Jun 02, 2019 5:19 pm

If I recall correctly Deere made .020 over pistons to do just as you say.

Duke
Top
User avatar
Lavoy
Site Admin
Site Admin
Posts: 10942
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:
Contact Lavoy

Re: 2010 cylinder plate

Post by Lavoy » Mon Jun 03, 2019 8:39 am

Yes, they can be bored. I used to have availability of oversize gas pistons, let me know if you want me to check.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Top
Post Reply

Return to “Early model JD crawler technical support”

Who is online

Users browsing this forum: Bing [Bot] and 33 guests