440 reverser adjustment

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
deeretails
40C crawler
40C crawler
Posts: 19
Joined: Wed Apr 18, 2018 5:59 am
Location: Southeastern Pennsylvania

440 reverser adjustment

Post by deeretails » Wed Jun 05, 2019 1:51 pm

How many joints does your arm need to have to adjust the reverser clutches on a 440 crawler with a 831 loader attached?

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10937
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Re: 440 reverser adjustment

Post by Lavoy » Wed Jun 05, 2019 2:19 pm

7 if standing on the ground, 4 if hanging by your ankles from a rafter. :lol:
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

deeretails
40C crawler
40C crawler
Posts: 19
Joined: Wed Apr 18, 2018 5:59 am
Location: Southeastern Pennsylvania

Re: 440 reverser adjustment

Post by deeretails » Wed Jun 05, 2019 3:52 pm

Thanks Lavoy, at least I know it can be done.

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10937
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Re: 440 reverser adjustment

Post by Lavoy » Wed Jun 05, 2019 8:08 pm

Just barely doable. Back clutch is the worst to me. You have to do it by feel pretty much.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

User avatar
Stan Disbrow
350 crawler
350 crawler
Posts: 2894
Joined: Fri Jul 15, 2005 3:13 pm
Location: Raleigh, NC

Re: 440 reverser adjustment

Post by Stan Disbrow » Thu Jun 06, 2019 6:00 am

Hi,

That pretty much describes any working on a crawler with a loader! :P

Stan
There's No Such Thing As A Cheap Crawler!

Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)

Post Reply

Who is online

Users browsing this forum: No registered users and 34 guests