440 reverser adjustment
-
- 40C crawler
- Posts: 19
- Joined: Wed Apr 18, 2018 5:59 am
- Location: Southeastern Pennsylvania
440 reverser adjustment
How many joints does your arm need to have to adjust the reverser clutches on a 440 crawler with a 831 loader attached?
Re: 440 reverser adjustment
7 if standing on the ground, 4 if hanging by your ankles from a rafter.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
-
- 40C crawler
- Posts: 19
- Joined: Wed Apr 18, 2018 5:59 am
- Location: Southeastern Pennsylvania
Re: 440 reverser adjustment
Thanks Lavoy, at least I know it can be done.
Re: 440 reverser adjustment
Just barely doable. Back clutch is the worst to me. You have to do it by feel pretty much.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
- Stan Disbrow
- 350 crawler
- Posts: 2898
- Joined: Fri Jul 15, 2005 3:13 pm
- Location: Raleigh, NC
Re: 440 reverser adjustment
Hi,
That pretty much describes any working on a crawler with a loader!
Stan
That pretty much describes any working on a crawler with a loader!
Stan
There's No Such Thing As A Cheap Crawler!
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)
Who is online
Users browsing this forum: No registered users and 124 guests