JD 40C final drive

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
mxc8099
MC crawler
MC crawler
Posts: 1
Joined: Fri Jun 28, 2019 6:13 pm

JD 40C final drive

Post by mxc8099 » Sat Jun 29, 2019 9:13 am

Is there any place on the Internet where the JD part numbers for the final drive (that is the lower drive shaft that connects to the drive sprocket the track rides on) are listed as common part numbers such as Timkin or SKF numbers? chasing daown obscure JD bearing numbers is exausting and if found, very expensive
Top
Jim B
350 crawler
350 crawler
Posts: 2086
Joined: Sun Nov 05, 2017 11:36 am
Location: western Maine

Re: JD 40C final drive

Post by Jim B » Sat Jun 29, 2019 9:26 am

Send Lavoy an email (postmaster@jdcrawlers.com). He will likely have the parts you need on hand. His business provides this site for us to use.
Top
User avatar
Lavoy
Site Admin
Site Admin
Posts: 10943
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:
Contact Lavoy

Re: JD 40C final drive

Post by Lavoy » Mon Jul 01, 2019 8:44 am

I normally have all of the bearings on hand.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Top
Post Reply

Return to “Early model JD crawler technical support”

Who is online

Users browsing this forum: No registered users and 62 guests