420-C S/N#100676

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
Allen John
MC crawler
MC crawler
Posts: 6
Joined: Thu Feb 15, 2018 1:40 pm
Location: RED HOOK , NY 12571

420-C S/N#100676

Post by Allen John » Mon Jan 13, 2020 7:13 am

I am rebuilding the right side final drive. have all the parts thanks to Lavoy Wilcox. I would like to know on the (clutch pressure plate) P/N #AT11853T. is there a tool or gauge to set the spring on it to specification. I have also install #7-facing plates p/n #M3293T and #6- driving plates M872T. NOTE- "I am a city folk so be nice" LOL Thanks for all your help !

Jim B
350 crawler
350 crawler
Posts: 2080
Joined: Sun Nov 05, 2017 11:36 am
Location: western Maine

Re: 420-C S/N#100676

Post by Jim B » Mon Jan 13, 2020 8:02 am

Contact Lavoy. He normally has the gauge (JD7) to set the pressure plate fingers with, in stock. Lavoy posted a copy of the JD service bulletin about using the gauge to set the fingers on the FAQ board. It is the second one down on the page.

Post Reply

Who is online

Users browsing this forum: No registered users and 38 guests