Oil pump fitting size for pressure line 40c
-
- 40C crawler
- Posts: 12
- Joined: Sun Jun 09, 2019 6:19 pm
- Location: Quebec canada
Oil pump fitting size for pressure line 40c
Need the size of the fitting on the oil pump where the pressure line connect. Parts j of figure 180-25-5 of the shop manual page 180-25-4. Just stripped mine and im unshure of the dimension. Thanks
Re: Oil pump fitting size for pressure line 40c
Here is a link to the parts catalog open to the page with the hydraulic oil pump, which I think you are referring to. https://partscatalog.deere.com/jdrc/sid ... gId/278897
If this is correct I believe you are looking at item key # 14. That fitting is 3/8 Male NPT thread into the pump and 1/2" inverted flare female thread for the tube, I believe. With the part number someone can likely confirm that for you. Lavoy likely can help you with one if you need.
If you are looking at a different fitting you can scroll through the parts catalog, find it and post the part number.
If this is correct I believe you are looking at item key # 14. That fitting is 3/8 Male NPT thread into the pump and 1/2" inverted flare female thread for the tube, I believe. With the part number someone can likely confirm that for you. Lavoy likely can help you with one if you need.
If you are looking at a different fitting you can scroll through the parts catalog, find it and post the part number.
-
- 40C crawler
- Posts: 12
- Joined: Sun Jun 09, 2019 6:19 pm
- Location: Quebec canada
Re: Oil pump fitting size for pressure line 40c
Thanks thats exactly what i needed
Re: Oil pump fitting size for pressure line 40c
In stock.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Who is online
Users browsing this forum: No registered users and 47 guests