Oil pump fitting size for pressure line 40c

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
Fredquebec
40C crawler
40C crawler
Posts: 12
Joined: Sun Jun 09, 2019 6:19 pm
Location: Quebec canada

Oil pump fitting size for pressure line 40c

Post by Fredquebec » Sat Feb 15, 2020 4:19 pm

Need the size of the fitting on the oil pump where the pressure line connect. Parts j of figure 180-25-5 of the shop manual page 180-25-4. Just stripped mine and im unshure of the dimension. Thanks

Jim B
350 crawler
350 crawler
Posts: 2080
Joined: Sun Nov 05, 2017 11:36 am
Location: western Maine

Re: Oil pump fitting size for pressure line 40c

Post by Jim B » Sat Feb 15, 2020 5:12 pm

Here is a link to the parts catalog open to the page with the hydraulic oil pump, which I think you are referring to. https://partscatalog.deere.com/jdrc/sid ... gId/278897

If this is correct I believe you are looking at item key # 14. That fitting is 3/8 Male NPT thread into the pump and 1/2" inverted flare female thread for the tube, I believe. With the part number someone can likely confirm that for you. Lavoy likely can help you with one if you need.

If you are looking at a different fitting you can scroll through the parts catalog, find it and post the part number.

Fredquebec
40C crawler
40C crawler
Posts: 12
Joined: Sun Jun 09, 2019 6:19 pm
Location: Quebec canada

Re: Oil pump fitting size for pressure line 40c

Post by Fredquebec » Sun Feb 16, 2020 5:47 am

Thanks thats exactly what i needed 😀

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10936
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Re: Oil pump fitting size for pressure line 40c

Post by Lavoy » Sun Feb 16, 2020 11:37 am

In stock.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

Post Reply

Who is online

Users browsing this forum: No registered users and 47 guests