welded ring to sprocket photo
- my fathers son
- 40C crawler
- Posts: 16
- Joined: Sun Sep 23, 2018 7:26 pm
- Location: Goshen MA
welded ring to sprocket photo
I have seen and made a copy of a real good picture of a 350 ring welded on some model sprocket and of course can’t find the copy or the site it came from. Tend not to think it came from JD crawler but maybe it did. Does anyone know if I’m just crazy or maybe not so much.
- Stan Disbrow
- 350 crawler
- Posts: 2898
- Joined: Fri Jul 15, 2005 3:13 pm
- Location: Raleigh, NC
Re: welded ring to sprocket photo
Hi,
A common thing is to cut the teeth off a 420 sprocket and weld on a 350 ring sprocket. This lets you use 350 rails on a 420.
I don't know where a pic might be, but it would be a good guess there are some on this site.
You are not crazy. Well, about this. Might be crazy because you like crawlers. Can't fix that!
Stan
A common thing is to cut the teeth off a 420 sprocket and weld on a 350 ring sprocket. This lets you use 350 rails on a 420.
I don't know where a pic might be, but it would be a good guess there are some on this site.
You are not crazy. Well, about this. Might be crazy because you like crawlers. Can't fix that!
Stan
There's No Such Thing As A Cheap Crawler!
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)
Re: welded ring to sprocket photo
Thre are some pictures in this post about a 420. The problem is they were in Photobucket, so are blurred. viewtopic.php?f=1&t=4390&p=20891&hilit= ... ket#p20891
- my fathers son
- 40C crawler
- Posts: 16
- Joined: Sun Sep 23, 2018 7:26 pm
- Location: Goshen MA
Re: welded ring to sprocket photo
Yes, those are the same photos (photo bucket) but were much clearer. Ill keep looking. Thanks
Re: welded ring to sprocket photo
Good old third party photo site ruins the date, again!!
Re: welded ring to sprocket photo
These are the ones I copied awhile back. hth
- my fathers son
- 40C crawler
- Posts: 16
- Joined: Sun Sep 23, 2018 7:26 pm
- Location: Goshen MA
Re: welded ring to sprocket photo
Bingo! good job
Re: welded ring to sprocket photo
That exact conversion is on my list to do in the future, just never seem to get the time to pursue it further. I am looking at having sprocket rims made for 420-1010 in the future.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Who is online
Users browsing this forum: No registered users and 139 guests