440 ic

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
gaspumpsam
440 crawler
440 crawler
Posts: 160
Joined: Sun Sep 22, 2019 8:56 am
Location: Quesnel, BC, Canada

440 ic

Post by gaspumpsam » Thu Apr 02, 2020 6:03 pm

Lavoy, could you measure the thickness of a new engine clutch plate. The one I have I supposed to be next to new before I dismantled, but I would like to be sure. Tks

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10293
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Re: 440 ic

Post by Lavoy » Thu Apr 02, 2020 8:32 pm

I don't have one on hand, sorry.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

gaspumpsam
440 crawler
440 crawler
Posts: 160
Joined: Sun Sep 22, 2019 8:56 am
Location: Quesnel, BC, Canada

Re: 440 ic

Post by gaspumpsam » Thu Apr 02, 2020 9:49 pm

Ok, thanks.
Anyone else have a new clutch plate they could measure the thickness ( engine) ?

User avatar
ddaxe
430 crawler
430 crawler
Posts: 65
Joined: Thu Aug 13, 2015 6:18 pm
Location: Northern Ontario Canada

Re: 440 ic

Post by ddaxe » Wed Apr 15, 2020 8:22 pm

I will see what I can do.. I haven't mated the engine in mine to the bell housing just yet.. engine is still on the stand.. but the PP is bolted on.. I'll see if I can get a number for you
Chrome don't getcha Home

gaspumpsam
440 crawler
440 crawler
Posts: 160
Joined: Sun Sep 22, 2019 8:56 am
Location: Quesnel, BC, Canada

Re: 440 ic

Post by gaspumpsam » Wed Apr 15, 2020 8:26 pm

Thanks. If you could, the thickness of the plate would be excellent !

User avatar
ddaxe
430 crawler
430 crawler
Posts: 65
Joined: Thu Aug 13, 2015 6:18 pm
Location: Northern Ontario Canada

Re: 440 ic

Post by ddaxe » Wed May 06, 2020 3:50 pm

gaspumpsam wrote:
Wed Apr 15, 2020 8:26 pm
Thanks. If you could, the thickness of the plate would be excellent !

Sorry to get back to you so late.. the clutch disc I have for a 440 measured .335"
Chrome don't getcha Home

Post Reply

Who is online

Users browsing this forum: No registered users and 16 guests