Switch wiring

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
User avatar
bookman51
430 crawler
430 crawler
Posts: 99
Joined: Mon May 29, 2006 10:20 am
Location: Kearney, Nebraska

Switch wiring

Post by bookman51 » Fri May 15, 2020 10:38 am

I have been trying to trace down a dead short that results in blowing a fuse when even I turn on the lights on my 1958 420 crawler. I think I have it narrow down to the wiring from the switch to the front headlights. I have taken off the front headlights and do not see any shorts there. Now I am starting from the switch end. I have the service manual and on page 80-10-3 there is a picture of the backside of the switch. Two questions: anyone got a better picture; and how to do I get the instrument panel far enough off to get to the switch? I took the screws off the front and loosened it. Do I have to get in there somehow and disconnect the tach and what else? Last question for the morning. Thanks in advance.

Post Reply

Who is online

Users browsing this forum: No registered users and 39 guests