JD 350 vs 1010

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
Keith-OR
430 crawler
430 crawler
Posts: 64
Joined: Fri Sep 22, 2017 9:35 pm
Location: Hermiston, Oregon

JD 350 vs 1010

Post by Keith-OR » Tue Jun 09, 2020 8:25 pm

So how much and what parts will interchange from a JD 350 to 1010, Will the tract and rollers interchange? I know the engine is different.

thanks
Keith
Keith

User avatar
gregjo1948
350 crawler
350 crawler
Posts: 1000
Joined: Mon Aug 30, 2010 5:58 am
Location: Newark Valley,NY,USA

Re: JD 350 vs 1010

Post by gregjo1948 » Wed Jun 10, 2020 3:20 am

I think the rollers can be made to work and if the sprockets rings are welded on the chains will work. Jim and/or Lavoy will know all about this subject.
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10936
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Re: JD 350 vs 1010

Post by Lavoy » Wed Jun 10, 2020 8:18 am

Not much. Some reverser parts, tracks from 350 can be made to work on 1010 with sprocket rims. I guess 1010 tracks could be run on 350 sprockets, bottom rollers, that is about it.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

Post Reply

Who is online

Users browsing this forum: No registered users and 54 guests