I currently have an operator's manual for the 420 crawler, a service manual for the 420 tractor (SM2019), a parts manual for the 62 blade and a parts manual for the 420 tractor. I also have Duane Larson's service bulletins on CD.
What other manuals would have information that would be useful or needed to repair my 420C? I would like to rebuild both final drives this winter, and also be prepared for other repairs as needed. I seem to remember that some of the earlier manuals for the MC or the 40C had information that also pertained to the 420C.
Thank you for any information on this subject.
Paul J.
Manuals needed for a 420C?
Manuals needed for a 420C?
420C, 5 roller, 62 blade
Re: Manuals needed for a 420C?
If you check around in your 420 service manual, I think you will find it refers to the 40 series manual (SM2013) for some required info. I forget just what, but there are some things.
Re: Manuals needed for a 420C?
Thanks Jim - That's probably where I got the idea, now that you mention it. It's been awhile since I've looked through the manuals.
Paul J.
Paul J.
420C, 5 roller, 62 blade
- Stan Disbrow
- 350 crawler
- Posts: 2898
- Joined: Fri Jul 15, 2005 3:13 pm
- Location: Raleigh, NC
Re: Manuals needed for a 420C?
Hi,
And, then the 40 manual points one toward the M manual for some things. Plus, if you have a Phase III 420c with a reverser, you need the 440 IC manual as well.
Stan
And, then the 40 manual points one toward the M manual for some things. Plus, if you have a Phase III 420c with a reverser, you need the 440 IC manual as well.
Stan
There's No Such Thing As A Cheap Crawler!
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)
Re: Manuals needed for a 420C?
I have the operator's manual from these guys. It's a reproduction of the factory one. They also have a service manual that includes the information that is referenced to from the 40 manual. It is 720 pages and I think that will be my next manual. JD's site lists the parts with numbers, it's just a little hard to find the section you want, but that will be my parts lookup for now. Pete
https://www.ebay.com/itm/SERVICE-MANUAL ... SwmBhaD1HX
https://www.ebay.com/itm/SERVICE-MANUAL ... SwmBhaD1HX
Who is online
Users browsing this forum: No registered users and 115 guests