It's always something!

[Paul Buhler]

Progress. Good luck.

[Bret4207]

AHHHHHH!!! Tried using the 1010 yesterday. Ran fine. The hydraulics were a little shaky. Got progressively worse the more I did, an air leak on the suction side I think. No oil leaks to be seen. I have a feeling the new hose I put in is a little too long and is pushing the steel line to the pump enough to let it suck air. I know th line hung down an inch or so and this wasn't happening before I put the pans back on. I'm going to get it up to the shop this time. I'll still be on my back in the cold, but at least I'll be near my tools when i drop the skid pan.