3 point parts schematic

tobaccofarmer · Post by **tobaccofarmer** » Wed Dec 09, 2020 10:30 pm

was wondering if anyone has the JD parts breakdown for the 3 point from a 420C ? and one for the retrofit kit for earlier and existing 40C'S and 420C'S
I'm trying to determine on a 40C with 3 point if it was taken from a 420C or was the retrofit deere offered, or are these the exact same making it impossible to tell the difference?

gregjo1948 · Post by **gregjo1948** » Thu Dec 10, 2020 1:59 am

You can try searching "John Deere Parts Catalog".

Jim B · Post by **Jim B** » Thu Dec 10, 2020 6:07 am

To add to gregjo1948's post, here are links direct to each of the parts catalogs, if you don't have them. I imagine finding documents on a retro-fit kit is going to be very hard. Finding dimensions, if that is what you are looking for, will be hard to impossible as well. JMHO
Jim

For the 40:
https://partscatalog.deere.com/jdrc/nav ... VJUE1FTlRd

For the 420:
https://partscatalog.deere.com/jdrc/nav ... VJUE1FTlRd

tobaccofarmer · Post by **tobaccofarmer** » Thu Dec 10, 2020 7:27 am

Thanks ! Just what I needed. There can't be any difference as to coming from factory or retrofit after the fact based on what I'm seeing in parts diagrams.

JDcrawlers Messageboard

3 point parts schematic

3 point parts schematic

Re: 3 point parts schematic

Re: 3 point parts schematic

Re: 3 point parts schematic

Who is online