612 Blade fit 2010?

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
WVDad
MC crawler
MC crawler
Posts: 3
Joined: Fri Dec 18, 2020 1:09 pm
Location: SW PA

612 Blade fit 2010?

Post by WVDad » Tue Dec 29, 2020 4:07 am

Hello all,

I recently purchased a (64) 2010 and have been doing lots of reading on the board, so first off I will say thanks to all!! I’m curious to know if a hyd 6way off a 1010 (from what I’ve read is a 612) would fit a 2010?
Top
User avatar
Lavoy
Site Admin
Site Admin
Posts: 10943
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:
Contact Lavoy

Re: 612 Blade fit 2010?

Post by Lavoy » Tue Dec 29, 2020 8:42 am

No, different mounts, and a 2010 would probably break a 612 eventually.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Top
WVDad
MC crawler
MC crawler
Posts: 3
Joined: Fri Dec 18, 2020 1:09 pm
Location: SW PA

Re: 612 Blade fit 2010?

Post by WVDad » Tue Dec 29, 2020 9:07 am

Thank you!!
Top
User avatar
Lavoy
Site Admin
Site Admin
Posts: 10943
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:
Contact Lavoy

Re: 612 Blade fit 2010?

Post by Lavoy » Tue Dec 29, 2020 10:27 am

No problem.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Top
Post Reply

Return to “Early model JD crawler technical support”

Who is online

Users browsing this forum: No registered users and 59 guests