2010 throttle linkage length.

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
signweld@yahoo.com
40C crawler
40C crawler
Posts: 12
Joined: Sat Jun 15, 2019 3:43 pm
Location: Westwen New York State

2010 throttle linkage length.

Post by signweld@yahoo.com » Sat Mar 20, 2021 7:12 pm

Hello all. On my 2010 wheel tractor gas,I got with the engine in pieces, and was apart with some boxes of parts. The only part I'm missing is the throttle control rod (speed control rod) that runs the left side along the water manifold. It would be nice if I had the center to center length before I make one.It attaches the governor linkage bell-crank to the linkage in the console. It seems to be 28" or so.
Anybody got there hood off who could measure it. Would save me a bunch of time.
Paul Morrison

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10937
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Re: 2010 throttle linkage length.

Post by Lavoy » Sun Mar 21, 2021 9:52 am

Used ones should be readily available from a tractor salvage yard, not worth the hassle of making one.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

Post Reply

Who is online

Users browsing this forum: No registered users and 33 guests