John Deere 1010 Dozer
John Deere 1010 Dozer
Edited Lavoy was 100% right about pumping the tube adjuster full of grease to pop out the cylinder, mine was just being a bugger lot of dirt caked on it
Re: John Deere 1010 Dozer
I usually take a cylinder hone and clean the inside of the barrel up really well before I put them back together. A layer of anti-seize or something on the part of the piston that is inside the seal up to the cup might help it not stick again.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Who is online
Users browsing this forum: No registered users and 64 guests