440c gas rebuild kit
440c gas rebuild kit
Just picked up a 59 440c for a steal runs turns stops hydros work But low on power and burns oil. Any links to a rebuild kit for it. Thanks guys
Re: 440c gas rebuild kit
Welcome to the Board.
Contact Lavoy, owner of this site. His business, repairing and selling parts for JD crawlers, provides this site for our free use, so it is right to support him. He can get what you need, if it is available. Email him (postmaster@jdcrawlers.com) or call the number on the homepage during CST business hours. These aren't sleeved engines where you get kits like wet sleeve engines. For these you have to see what you need, and get those parts. If you have a bad cylinder the block has to be bored for oversize pistons, or bored and dry sleeved back to standard. Beware that some parts are hard to come by these days and may have some lead time before you get them.
Jim
Contact Lavoy, owner of this site. His business, repairing and selling parts for JD crawlers, provides this site for our free use, so it is right to support him. He can get what you need, if it is available. Email him (postmaster@jdcrawlers.com) or call the number on the homepage during CST business hours. These aren't sleeved engines where you get kits like wet sleeve engines. For these you have to see what you need, and get those parts. If you have a bad cylinder the block has to be bored for oversize pistons, or bored and dry sleeved back to standard. Beware that some parts are hard to come by these days and may have some lead time before you get them.
Jim
Re: 440c gas rebuild kit
Right now, no main bearings available, the rest of the parts so far have not been an issue.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Who is online
Users browsing this forum: No registered users and 88 guests