John Deere 40c hydraulics
John Deere 40c hydraulics
JD40c on Mon May 20, 2013 11:23 pm showed a picture of the hydraulic lines going from the hydraulic control valve to the hydraulic cylinder. That is what I want to do. Where did you get the elbows to go into the control valve? They appear to be regular pipe elbows. Were you able to push the springs down with a regular pipe elbow?
Re: John Deere 40c hydraulics
If using regular pipe elbows, you install a 3/4" to 1/2" reducer which keeps pressure on the spring, and then use 1/2" elbows, that is the way Deere recommends.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Re: John Deere 40c hydraulics
Thank you, Lavoy, will get to it later when the ice is off the highways.
Who is online
Users browsing this forum: Google [Bot] and 60 guests