I'm attempting to rebuild transmission (5 speed) in gas 440 IC.Serial number 451959. Got it out (whew! and am disassembling it.
Contacted Lavoy and he's rounding up all the bearings etc. for me.
Gears seem serviceable except on the 3-gear cluster (part # 6 on page 52 of parts manual) the smallest gear (23 teeth and closest to front )is more pointed (from wear) than one would like,
If anybody has suggestions, I'd sure appreciate them. Part could be used but clearly will not last as long as the others. Too much work to do this all over again in just a few years.
Thanks in advance,
John
440IC transmission project
-
- MC crawler
- Posts: 1
- Joined: Wed Sep 07, 2022 8:41 am
- Location: Boulder County Colorado
Who is online
Users browsing this forum: No registered users and 78 guests