Log arch/

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
User avatar
Jaybird
420 crawler
420 crawler
Posts: 32
Joined: Tue Aug 11, 2015 6:53 pm
Location: NC

Log arch/

Post by Jaybird » Sun Dec 18, 2022 6:34 pm

Does anyone know if a log arch off a 350 or a 1010 will fit a 440 ? I would also like to know if a reverser from an early model 440 will fit on my 1960 430 wheel tractor? Thanks in advance

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10936
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Re: Log arch/

Post by Lavoy » Mon Dec 19, 2022 8:55 am

Definitely not from 350, 1010 possibly depends on winch.
Yes, you can remove the reverser internals and install in your center section.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

User avatar
Jaybird
420 crawler
420 crawler
Posts: 32
Joined: Tue Aug 11, 2015 6:53 pm
Location: NC

Re: Log arch/

Post by Jaybird » Mon Dec 19, 2022 9:14 pm

Does the whole housing from the 440 fit the 430 wheel tractor? How will this effect the clutch? Or will it?

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10936
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Re: Log arch/

Post by Lavoy » Tue Dec 20, 2022 9:01 am

It will depending on the 440 serial number, but you should take it apart and check it out before installation anyway.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

Post Reply

Who is online

Users browsing this forum: No registered users and 62 guests