Hydraulic hard line on 420c

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
ChainGang
MC crawler
MC crawler
Posts: 5
Joined: Mon Apr 11, 2022 10:58 am

Hydraulic hard line on 420c

Post by ChainGang » Wed May 03, 2023 5:15 am

Looking for the tube size and the flare angle. Thanks. This is line is from the pump to control valve.

gregmech
MC crawler
MC crawler
Posts: 5
Joined: Sun Sep 30, 2018 1:34 pm
Location: Alberta, Canada

Re: Hydraulic hard line on 420c

Post by gregmech » Mon May 08, 2023 3:48 pm

It is 1/2" tube with 45 degree single flare. I built a new one for my 420 out of stainless because I had it. Mild steel would work too, the pressure is less then 1000 psi

Post Reply

Who is online

Users browsing this forum: No registered users and 66 guests