430C 3 point
430C 3 point
What is the secret for removing the hollow dowel pins in final drive that the drawbar is attached to. Drawbar won't fit unless they are removed. Have tried heat, soaked in Kroil, pipe wrench etc.
Re: 430C 3 point
THey are tapped 5/8" NC, clean the threads out, screw a short bolt in, drive them out with a long punch from the outside in, or use a hollow ram porta power.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Re: 430C 3 point
Thanks Lavoy. Got some of them out. It's amazing how tough rust weld is.
Re: 430C 3 point
Got them out. Only one blackened finger nail in the process. Good thing it wasn't my middle finger, or I wouldn't be able to drive. lol
Re: 430C 3 point
I feel your pain.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Who is online
Users browsing this forum: No registered users and 60 guests