grease gun for button head grease zerks

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
mc_mike
430 crawler
430 crawler
Posts: 98
Joined: Mon Nov 28, 2005 11:00 am
Location: Green Springs, Ohio

grease gun for button head grease zerks

Post by mc_mike » Tue Mar 20, 2007 7:48 pm

Where can I get an adapter for my standard grease gun for the button head grease fittings on my 420?
Top
User avatar
Jimmy in NC
440 crawler
440 crawler
Posts: 164
Joined: Fri Apr 22, 2005 10:44 pm
Location: Raleigh - NC

Post by Jimmy in NC » Tue Mar 20, 2007 7:49 pm

I got mine from Lavoy. Added a pistol grip gun and some corn header grease and we were off and away.


Jimmy in NC
1957 420C 4 roller 4 spd #61 blade 107,xxx ser.
Hand clutches, not for everyone.
Steering clutches, for even less.
Top
User avatar
jac
440 crawler
440 crawler
Posts: 170
Joined: Mon Sep 12, 2005 11:41 am

Post by jac » Tue Mar 20, 2007 8:42 pm

If you happen to have a good old fashion hardware store around, you may get lucky and find one. I found two at an old hardware store, probably were hanging there for thirty years based on the amount of dust on them (price was not pretty good too).

If not, I believe Lavoy has them.
Top
User avatar
shinnery
350 crawler
350 crawler
Posts: 774
Joined: Fri Jan 27, 2006 4:55 pm
Location: Hawley, Texas

Post by shinnery » Tue Mar 20, 2007 11:43 pm

I BOUGHT one at Yellowhouse. That's the name of my local JD Industrial dealer. The green tractor people did not want to talk about a 440ICD. LOL
Bryce
No trees were hurt in the creation of this message.
But, many electrons were terribly bothered.

440IC/602, 2-440ICD/831 MM UBU-LP, 445N-LP, 445E-LP, BIG MO 400-M, 4 Star-LP M5-D, M5-LP, M602-LP, M670-LP, G900-LP, G900-D, G1000 Vista-LP Case 580CK
Top
User avatar
wwattson
1010 crawler
1010 crawler
Posts: 499
Joined: Mon Aug 07, 2006 9:12 pm
Location: West Bend, WI

Post by wwattson » Wed Mar 21, 2007 1:02 am

eBay normally has a few listed and McMaster-Carr has them.
Bill Wattson
Top
Tooldie
MC crawler
MC crawler
Posts: 1
Joined: Thu Mar 08, 2007 11:14 pm
Location: Austin Pa

Post by Tooldie » Wed Mar 21, 2007 7:53 am

I got mine at NAPA about $35
If if ain't broke, don't try to fix it!
Top
User avatar
wwattson
1010 crawler
1010 crawler
Posts: 499
Joined: Mon Aug 07, 2006 9:12 pm
Location: West Bend, WI

Post by wwattson » Wed Mar 21, 2007 8:35 am

Page 2099 in the current McMaster Carr catalog has the following.

90° Extension Adapter with Standard Button-Head Coupler— Max. pressure is 4000 psi. 2906K97 Each $13.24
Bill Wattson
Top
User avatar
Tim_in_IA
430 crawler
430 crawler
Posts: 87
Joined: Fri Oct 13, 2006 7:07 pm
Location: Eastern Iowa
Contact:
Contact Tim_in_IA

Post by Tim_in_IA » Wed Mar 21, 2007 2:41 pm

wwattson wrote:Page 2099 in the current McMaster Carr catalog has the following.

90° Extension Adapter with Standard Button-Head Coupler— Max. pressure is 4000 psi. 2906K97 Each $13.24
I got the same thing from grainger.com and then I removed the adapter part and permanently put it on a grease gun.
1958 440ic with blade
Top
User avatar
wwattson
1010 crawler
1010 crawler
Posts: 499
Joined: Mon Aug 07, 2006 9:12 pm
Location: West Bend, WI

Post by wwattson » Wed Mar 21, 2007 3:17 pm

This post got me looking and I'm sorry to say that there was a new one on eBay with the 1/8" NPT for $12 and free shipping so I snagged it. They sell for $32 - $35 on McMaster and Grainger so I couldn't help myself because I didn't have one yet. Sorry. :oops:
Bill Wattson
Top
Post Reply

Return to “Early model JD crawler technical support”

Who is online

Users browsing this forum: No registered users and 96 guests