General help and support for your Lindeman through 2010 John Deere crawler
-
woodchuck
- MC crawler
- Posts: 9
- Joined: Wed Mar 28, 2007 9:50 am
- Location: Fremont, MI
Post
by woodchuck » Thu Mar 29, 2007 5:33 am
Ok, I am looking for the correct part number for the track drive sprockets for my father's 1955 40C crawler. I found a number in the casting that is TE235Y. I called a couple of local dealers and they find a number of TE235YT. Can anyone tell me if this is the correct number or not? I would like to purchase new sprockets but do not want to get the wrong ones.
-
Lavoy
- Site Admin
- Posts: 10954
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Thu Mar 29, 2007 7:30 am
Yes, that is the number.
Lavoy
-
wwattson
- 1010 crawler
- Posts: 499
- Joined: Mon Aug 07, 2006 9:12 pm
- Location: West Bend, WI
Post
by wwattson » Thu Mar 29, 2007 7:40 am
You're going to love the price from Deere on that sprocket. Well, at least you can still get them.
Bill Wattson
-
woodchuck
- MC crawler
- Posts: 9
- Joined: Wed Mar 28, 2007 9:50 am
- Location: Fremont, MI
Post
by woodchuck » Thu Mar 29, 2007 9:48 am
Thanks guys! My cost from JD is $175 each. Not bad as far as I am concerned.
-
wwattson
- 1010 crawler
- Posts: 499
- Joined: Mon Aug 07, 2006 9:12 pm
- Location: West Bend, WI
Post
by wwattson » Thu Mar 29, 2007 10:38 am
That's great! When I looked them up on jdparts, they came up at $581 each. I think I'd like to talk to your dealer rather than mine.
Bill Wattson
-
Tigerhaze
- 350 crawler
- Posts: 2278
- Joined: Thu Jul 06, 2006 12:13 pm
- Location: West-Central MO
Post
by Tigerhaze » Thu Mar 29, 2007 12:28 pm
At least they are available- I am hearing that the 2010 sprockets are obselete.
(1) JD Straight 450 crawler dozer with manual outside blade; (2) JD 2010 diesel crawler loaders; (1) JD 2010 diesel dozer with hydraulic 6-way blade; (2) Model 50 backhoe attachments, misc. other construction equipment
-
NNAATZ
- 1010 crawler
- Posts: 296
- Joined: Fri Oct 13, 2006 7:16 am
- Location: austin,mn
Post
by NNAATZ » Thu Mar 29, 2007 1:34 pm
just for giggels i call my jd dealer he said $584 list and he could not get them because they did not handle constion equip. but avable
-
Lavoy
- Site Admin
- Posts: 10954
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Thu Mar 29, 2007 3:27 pm
I have would have to believe your dealer is making a big mistake. Not that I would tell him he is, but NNAATZ is right on the money. Last price I remembered off the top of my head is $485/each, and that is a few years ago. If he sells them to you for that price, take them and run before he figures out his mistake.
Lavoy
-
Lavoy
- Site Admin
- Posts: 10954
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Thu Mar 29, 2007 3:36 pm
Okay, just to satisfy my curiousity, I called my local dealer, $611.77/each + freight depending on your time frame. I also did some checking online and came up with the same figure. I thought they were spendy when they hit $450, but WOW!
Lavoy
-
ggfossen
- 440 crawler
- Posts: 216
- Joined: Thu May 05, 2005 8:08 pm
- Location: Jacksonville, Oregon
Post
by ggfossen » Thu Mar 29, 2007 8:02 pm
Are these, by any chance, the same as 420 sprockets?
Gary
-
NNAATZ
- 1010 crawler
- Posts: 296
- Joined: Fri Oct 13, 2006 7:16 am
- Location: austin,mn
Post
by NNAATZ » Thu Mar 29, 2007 8:13 pm
no, i belive the pitch is different
-
ggfossen
- 440 crawler
- Posts: 216
- Joined: Thu May 05, 2005 8:08 pm
- Location: Jacksonville, Oregon
Post
by ggfossen » Thu Mar 29, 2007 10:03 pm
NN
OK, Thanks. I have a set of 420s in pretty good shape, but haven't decided if I want to let them go just yet.
thanks,
Gary
-
woodchuck
- MC crawler
- Posts: 9
- Joined: Wed Mar 28, 2007 9:50 am
- Location: Fremont, MI
Post
by woodchuck » Fri Mar 30, 2007 6:30 am
Guys,
I just ordered 2 of them. $175 each. I had my dealer confirm cost and also had him check the picture of the part in his catalog. He confirmed they are the drive sprockets for a 40C. If you want his contact info, I will provide it.
-
NNAATZ
- 1010 crawler
- Posts: 296
- Joined: Fri Oct 13, 2006 7:16 am
- Location: austin,mn
Post
by NNAATZ » Fri Mar 30, 2007 6:53 am
wow. just out of curiosity dose your dealer handle the const. end of jd. there must some other prices betteen cost and list depending on discount
-
NNAATZ
- 1010 crawler
- Posts: 296
- Joined: Fri Oct 13, 2006 7:16 am
- Location: austin,mn
Post
by NNAATZ » Fri Mar 30, 2007 6:58 am
you must have it in good with the parts fellow, thats a hell of a discount
Who is online
Users browsing this forum: No registered users and 75 guests