Drive sprockets for 1955 40C

woodchuck · Post by **woodchuck** » Thu Mar 29, 2007 5:33 am

Ok, I am looking for the correct part number for the track drive sprockets for my father's 1955 40C crawler. I found a number in the casting that is TE235Y. I called a couple of local dealers and they find a number of TE235YT. Can anyone tell me if this is the correct number or not? I would like to purchase new sprockets but do not want to get the wrong ones.

Post by **Lavoy** » Thu Mar 29, 2007 7:30 am

Yes, that is the number.
Lavoy

wwattson · Post by **wwattson** » Thu Mar 29, 2007 7:40 am

You're going to love the price from Deere on that sprocket. Well, at least you can still get them.

woodchuck · Post by **woodchuck** » Thu Mar 29, 2007 9:48 am

Thanks guys! My cost from JD is $175 each. Not bad as far as I am concerned.

wwattson · Post by **wwattson** » Thu Mar 29, 2007 10:38 am

That's great! When I looked them up on jdparts, they came up at $581 each. I think I'd like to talk to your dealer rather than mine.

Tigerhaze · Post by **Tigerhaze** » Thu Mar 29, 2007 12:28 pm

At least they are available- I am hearing that the 2010 sprockets are obselete.

NNAATZ · Post by **NNAATZ** » Thu Mar 29, 2007 1:34 pm

just for giggels i call my jd dealer he said $584 list and he could not get them because they did not handle constion equip. but avable

Post by **Lavoy** » Thu Mar 29, 2007 3:27 pm

I have would have to believe your dealer is making a big mistake. Not that I would tell him he is, but NNAATZ is right on the money. Last price I remembered off the top of my head is $485/each, and that is a few years ago. If he sells them to you for that price, take them and run before he figures out his mistake.
Lavoy

Post by **Lavoy** » Thu Mar 29, 2007 3:36 pm

Okay, just to satisfy my curiousity, I called my local dealer, $611.77/each + freight depending on your time frame. I also did some checking online and came up with the same figure. I thought they were spendy when they hit $450, but WOW!
Lavoy

ggfossen · Post by **ggfossen** » Thu Mar 29, 2007 8:02 pm

Are these, by any chance, the same as 420 sprockets?

Gary

NNAATZ · Post by **NNAATZ** » Thu Mar 29, 2007 8:13 pm

no, i belive the pitch is different

ggfossen · Post by **ggfossen** » Thu Mar 29, 2007 10:03 pm

NN

OK, Thanks. I have a set of 420s in pretty good shape, but haven't decided if I want to let them go just yet.

thanks,

Gary

woodchuck · Post by **woodchuck** » Fri Mar 30, 2007 6:30 am

Guys,
I just ordered 2 of them. $175 each. I had my dealer confirm cost and also had him check the picture of the part in his catalog. He confirmed they are the drive sprockets for a 40C. If you want his contact info, I will provide it.

NNAATZ · Post by **NNAATZ** » Fri Mar 30, 2007 6:53 am

wow. just out of curiosity dose your dealer handle the const. end of jd. there must some other prices betteen cost and list depending on discount

NNAATZ · Post by **NNAATZ** » Fri Mar 30, 2007 6:58 am

you must have it in good with the parts fellow, thats a hell of a discount

JDcrawlers Messageboard

Drive sprockets for 1955 40C

Drive sprockets for 1955 40C

40C Sprockets

Who is online