Hydraulic cylinder repair
- carolina crawler
- 430 crawler
- Posts: 99
- Joined: Mon Apr 30, 2007 1:51 pm
- Location: marietta ga/marietta sc
Hydraulic cylinder repair
Hello friends in crawler land......are complete repair/rebuild kits avail for most of the older JD Hydraulics?....Yes, another task is locating rebuild kits for all 4 of my cylinders for my 440 crawler loader.all the shafts are almost perfect with no pits or rust...but one bucket cylinder leaks pretty good,others dry, but want to freshen up all of them...looks pretty easy to do?.....any thoughts?......Cc
- JD440ICD2006
- 350 crawler
- Posts: 1113
- Joined: Tue Aug 22, 2006 3:57 pm
- Location: South Carolina
I found cylinder rebuild kits at the local JD Industrial Dealer, Van Lott. The cylinders are not hard to rebuild if you have common shop tools. Just pay very close attention to how everything comes out, and verify it with a JD parts list.
1959 JD 440ICD w/64 Power Angle Tilt Blade
1959 JD 440ICD w/63 Manual Angle Blade
1959 JD 440IC w/602 Manual Angle Blade
1959 JD 730D W SE (many options)
1950 JD M S w/M-20 Mower
1952 JD M W
1955 FORD 640 (burns the most fuel)
1959 JD 440ICD w/63 Manual Angle Blade
1959 JD 440IC w/602 Manual Angle Blade
1959 JD 730D W SE (many options)
1950 JD M S w/M-20 Mower
1952 JD M W
1955 FORD 640 (burns the most fuel)
- carolina crawler
- 430 crawler
- Posts: 99
- Joined: Mon Apr 30, 2007 1:51 pm
- Location: marietta ga/marietta sc
Who is online
Users browsing this forum: No registered users and 124 guests