1010 TRACK TENSIONER

crawlersandbighorns · Post by **crawlersandbighorns** » Sat May 19, 2007 1:10 am

LAVOY, I AM NEW TO THE FORUM BUT HAVE ADMIRED IT FOR A LONG TIME. I HAVE SEEN PAST POSTS WHERE YOU HAVE HAD AFTERMARKET
MANUAL ADJUST TENSIONER TO BOLT ON INSTEAD OF FACTORY HYDRAULIC(GREASE). CAN YOU STILL GET THEM? THANKS, DAN

Post by **Lavoy** » Sat May 19, 2007 8:40 am

Dan,
It is the other way around, I have availabilility of aftermarket hyd adjusters.
Lavoy

crawlersandbighorns · Post by **crawlersandbighorns** » Sat May 19, 2007 11:42 pm

OOPS ON MY PART, LAVOY. HOW MUCH AND HOW DO THEY BOLT UP?
RIGHT IN PLACE OF THE OLD ONES? BOTH OF MINE ARE CRACKED AND LEAK GREASE TERRIBLE. THANKS, DAN

Post by **Lavoy** » Sun May 20, 2007 9:09 am

Dan,
They are a direct bolt up setup, have not priced them lately, but somewhere over $300/each I am guessing.
Lavoy

roofdog · Post by **roofdog** » Thu May 31, 2007 4:43 pm

i cut angle iron to fit,and used U bolts to keep in place,but i think my tracks are to tight now.

JDcrawlers Messageboard

1010 TRACK TENSIONER

1010 TRACK TENSIONER

TRACK TENSIONER

Who is online