where to find the reverser.

[tod]

my 440ic is all the way apart now ,because of a coupling .the problem seems to be that i use reverse to much and it seems to take forever to get back there,before i go and put the crawler togather again i would like to put a reverser in it ,does anyone have one that is available for my crawler?

[Lavoy]

Tod,
I have one, but it is not out of the crawler yet. Wouldn't take all that long to do it, but I do not have the crawler here.
Lavoy

[tod]

Tod,
I have one, but it is not out of the crawler yet. Wouldn't take all that long to do it, but I do not have the crawler here.
Lavoy

how much ?BIG BUCKS? hecl lets put a reverser in it ! it will make the crawler so much more useful too.

[Lavoy]

I should check and see that it is good first. Send me an e-mail and I can get back to you when I know.
Lavoy

[tod]

I should check and see that it is good first. Send me an e-mail and I can get back to you when I know.
Lavoy

lavoy , i been working on the crawler today, i preped and painted the engine ,belhousing and direction reverser housing,also took it apart more and pressure washed it .getting ready for paint i still have to remove the loader to do a clean job,did you find out if the reverser you have is any good yet?im concerned about putting back togather and having the same thing happen with the coupling.it seems liketheres something missing .on page 40of the parts manual it shows a yoke and a shaft 11 and 13is that different than 44 and 42? Tod

[Lavoy]

Tod,
I do not have the reverser here, it is 50 miles from me, and still in the crawler.
Lavoy

[Lavoy]

Tod,
Got it here, give me a call.
Lavoy