General help and support for your Lindeman through 2010 John Deere crawler
-
stmftr395
- 440 crawler
- Posts: 104
- Joined: Mon Dec 11, 2006 10:21 am
- Location: Western N.Y.
Post
by stmftr395 » Fri Sep 14, 2007 12:04 pm
Looking for some information concerning the controller for a 1010 winch. Have access to a winch but the controller is missing. Have been told that controllers are hard to find? Can a person fabricate a controller? Seems to me that it is just a hydralic valve assembly. Any help would be appreciated. Anyone with a complete winch for sale should contact me as I am in the market. Thanks Mark
-
Lavoy
- Site Admin
- Posts: 10951
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Fri Sep 14, 2007 2:15 pm
Winch control is basically a dual master cylinder. One way engages the clutch, other way disengages the brake. I would think that the controller off of a Gearmatic should work as well. I have heard that they are available new, but have never priced one.
Lavoy
-
Stretch
- 440 crawler
- Posts: 200
- Joined: Mon Feb 19, 2007 6:48 pm
- Location: Albemarle, NC
Post
by Stretch » Fri Sep 14, 2007 5:32 pm
I am in the process of making one up for my 2010 using two clutch slave cylinders, heim joints, and a prayer.
I'll let you know if it works.
Stretch
2010C Dozer, 2010C Loader
If at first you don't succeed, get a bigger hammer.
-
JD430C
- 1010 crawler
- Posts: 350
- Joined: Tue May 03, 2005 11:00 pm
- Location: Northfield, Vermont
-
Contact:
Post
by JD430C » Sat Sep 15, 2007 11:30 am
hello, i have a complete 10 series winch with control, if u are interested pm me. i want to sell as a complete unit though.
andrew
jds- 450B, 450C, 550, 4020, 3140 MFWD, 5200 MFWD
-
russ61
- 420 crawler
- Posts: 26
- Joined: Sat Oct 22, 2005 3:44 am
Post
by russ61 » Mon Sep 17, 2007 4:06 am
I have a winch I got from my neighbor,not sure who made it.It's to heavy to roll over to find out.But what I was wanting to use as a controller is a single lever cutting brake control for a rail buggy.Baisically 2 mastercylinders mounted over top one another with a push / pull handle for each direction.
Russ
-
repairshop
- MC crawler
- Posts: 1
- Joined: Mon Oct 29, 2007 7:10 pm
- Location: west virginia
Post
by repairshop » Sat Nov 03, 2007 7:19 pm
Lavoy wrote:Winch control is basically a dual master cylinder. One way engages the clutch, other way disengages the brake. I would think that the controller off of a Gearmatic should work as well. I have heard that they are available new, but have never priced one.
Lavoy
Where are they avaible? Need a rebuild kit or a new one for a series 10 on a 1010 crawler.
-
Lavoy
- Site Admin
- Posts: 10951
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Mon Nov 05, 2007 9:00 am
I don't know, never been able to verify the rumor, that is just what I was told.
Lavoy
-
Davie Sprocket
- 430 crawler
- Posts: 71
- Joined: Sun Jul 08, 2007 11:37 am
- Location: Leduc Alberta, Canada
Post
by Davie Sprocket » Mon Nov 05, 2007 3:01 pm
Has anyone been able to make a controller? I can see the idea but has anyone build one? Was it real common to just through them away when they stopped working, seems to be alot of guys with out one, including myself.
Dave
Who is online
Users browsing this forum: Google [Bot] and 134 guests