Track Link Needed

mhannan · Post by **mhannan** » Mon Oct 15, 2007 7:30 pm

I hope someone out there might be able to assist. We are new crawler owners and have our first issue.

Our crawler is a 1968? 1010 with a 440 track. We are in need of a track link. The part number is T-11294T. Any suggestion on where we might be able to find one?

Our local dealer can't get a part for us and suggested we search the internet. So far, no luck.

JD440ICD2006 · Post by **JD440ICD2006** » Tue Oct 16, 2007 6:33 am

Hello, and welcome to the best crawler site on the Internet.

When you say your crawler has a "440 track" do you mean that it has the two bolt grouser track that was original on 440s?

NNAATZ · Post by **NNAATZ** » Tue Oct 16, 2007 7:26 am

i may have a pair, give me some measurements. i'll dig them out tonight, not exact on what they fit but are JD
nick

mhannan · Post by **mhannan** » Tue Oct 16, 2007 6:10 pm

I will have my husband take some measurements. What I do know is they have a number on them. The replacement that we need is T11294T. It is a one hole link. We are new to this, so I apologize I don't have all the information

mhannan · Post by **mhannan** » Tue Oct 16, 2007 6:16 pm

I do have some pictures of the part we are looking for. Is it possible to post pictures on here, or can I send them to your email address.

NNAATZ · Post by **NNAATZ** » Wed Oct 17, 2007 6:07 am

i found them but left them in my truck, my email at work is darren@featherlitegraphics.com

NNAATZ · Post by **NNAATZ** » Thu Oct 18, 2007 7:02 am

i have 2 sets but i am afraid this not what you're looking for T11293T two bolt rails for a 420 and T14269T four bolt rails for something later?????????? size wise i dont know if the four bolt will work, i have pads too

NNAATZ · Post by **NNAATZ** » Thu Oct 18, 2007 9:08 am

read the wrong track link, i do have the T11294T part email me so i press them apart

mhannan · Post by **mhannan** » Thu Oct 18, 2007 5:23 pm

I just sent you an email.

If you have T-11293T and T-11294T, we will take them both. This will make the complete link, correct?

I will call you tomorrow at the numbers you provided to work out the details. Thanks for all of your help.

bearman · Post by **bearman** » Sat Oct 27, 2007 10:01 pm

NNAATZ wrote:i have 2 sets but i am afraid this not what you're looking for T11293T two bolt rails for a 420 and T14269T four bolt rails for something later?????????? size wise i dont know if the four bolt will work, i have pads too

i need one the left side part t 14269 t 5 roller . would you have this part?[/b][/list]

NNAATZ · Post by **NNAATZ** » Sun Oct 28, 2007 6:44 pm

i have one pair, i will have to find them again, email me at the adress i had posted

JDcrawlers Messageboard

Track Link Needed

Track Link Needed

Track link

link

Who is online