General help and support for your Lindeman through 2010 John Deere crawler
-
ptrachte
- 420 crawler
- Posts: 43
- Joined: Sat Nov 10, 2007 10:19 am
- Location: Oregon North Willamette Valley
-
Contact:
Post
by ptrachte » Fri Nov 16, 2007 8:04 pm
I've been reading thru alot of the 1010 steering posts on this board, and have noticed something: seems like its the darn LEFT side that is usually either stickin, or slippin or just plain froze. Mine's sick on the left side too. I realize this is not scientific, but is there any history to that or am i smokin something?
Paul-1010 crawler/loader
-
wwattson
- 1010 crawler
- Posts: 499
- Joined: Mon Aug 07, 2006 9:12 pm
- Location: West Bend, WI
Post
by wwattson » Fri Nov 16, 2007 10:36 pm
Mine was stuck on the left side. It's the complete opposite problem than the others but it's still the left side.
Bill Wattson
-
K LeClair
- 430 crawler
- Posts: 52
- Joined: Thu Oct 11, 2007 3:46 pm
- Location: Glenville,NY
Post
by K LeClair » Sat Nov 17, 2007 5:14 am
At the moment,My 1010 clutches are COMPLETELY stuck on the RIGHT side.I will replace both sides this winter.
1010 Diesel,Crawler loader,Hydraulic Winch
350B Diesel,6-Way Blade
-
K LeClair
- 430 crawler
- Posts: 52
- Joined: Thu Oct 11, 2007 3:46 pm
- Location: Glenville,NY
Post
by K LeClair » Mon Nov 19, 2007 4:03 pm
I take that back.My left side is gone.Both sides need steering clutches/brake bands.My right track has power and my left has NOTHING going to it.I am hopeing that the final drive is OK
????????
1010 Diesel,Crawler loader,Hydraulic Winch
350B Diesel,6-Way Blade
-
roofdog
- 420 crawler
- Posts: 32
- Joined: Mon Mar 26, 2007 11:04 am
- Location: PA/NY border
Post
by roofdog » Thu Nov 22, 2007 7:47 am
my left side won`t steer either,it will never make it on a nascar track.
should of been a mechanic NOT a Roofer
-
K LeClair
- 430 crawler
- Posts: 52
- Joined: Thu Oct 11, 2007 3:46 pm
- Location: Glenville,NY
Post
by K LeClair » Thu Nov 22, 2007 8:32 am
Sure it will!!
You know the oval track saying,turn right to go left
!!
1010 Diesel,Crawler loader,Hydraulic Winch
350B Diesel,6-Way Blade
-
ptrachte
- 420 crawler
- Posts: 43
- Joined: Sat Nov 10, 2007 10:19 am
- Location: Oregon North Willamette Valley
-
Contact:
Post
by ptrachte » Thu Nov 22, 2007 12:55 pm
After reading some more posts on the steering thing, I realized that if i pull the left, and nothing happens or its weak, its really the right clutch slipping. In addition, if i use the left brake, to slow or stop the left track, i still don't get alot of turn - which if i understand it right, means that the left brake is slipping too. Now i'm a little bit of a right wing guy, but i need to turn left once in a while.
Paul-1010 crawler/loader
Who is online
Users browsing this forum: pauly68 and 112 guests