440 BOTTOM END
-
- 40C crawler
- Posts: 24
- Joined: Fri Apr 08, 2005 4:31 pm
- Location: NEW JERSEY
440 BOTTOM END
I HAVE A 440 CRAWLER WITH THE BOTTOM END PRETTY MUCH SHOT , WHAT ARE MY OPTIONS, AND WHAT PARTS ARE AVAILABLE ?
-
- 40C crawler
- Posts: 24
- Joined: Fri Apr 08, 2005 4:31 pm
- Location: NEW JERSEY
-
- 40C crawler
- Posts: 24
- Joined: Fri Apr 08, 2005 4:31 pm
- Location: NEW JERSEY
The new replaement adjusters are around $300 if memory serves. Just sold one to a guy for his 2010, same concept as the 440, just built slightly different. They are good adjusters, in some ways better than original.
Hard to guess on freight, off the cuff guess would be $250 for bare rails, no pads. I get a pretty healthy discount on freight out of here.
I don't normally keep finished rails on hand, I never know what link count someone will want. Should be able to do a set in a couple of weeks.
Lavoy
Hard to guess on freight, off the cuff guess would be $250 for bare rails, no pads. I get a pretty healthy discount on freight out of here.
I don't normally keep finished rails on hand, I never know what link count someone will want. Should be able to do a set in a couple of weeks.
Lavoy
Who is online
Users browsing this forum: No registered users and 87 guests