440 BOTTOM END

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
440 CRAWLER
40C crawler
40C crawler
Posts: 24
Joined: Fri Apr 08, 2005 4:31 pm
Location: NEW JERSEY

440 BOTTOM END

Post by 440 CRAWLER » Fri Apr 08, 2005 4:44 pm

I HAVE A 440 CRAWLER WITH THE BOTTOM END PRETTY MUCH SHOT , WHAT ARE MY OPTIONS, AND WHAT PARTS ARE AVAILABLE ?

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10937
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Post by Lavoy » Fri Apr 08, 2005 5:17 pm

I assume you mean undercarraige? I can rebush you a set of tracks, we should have enough used rollers, and either new or used sprockets depeding on serial number.
Lavoy

440 CRAWLER
40C crawler
40C crawler
Posts: 24
Joined: Fri Apr 08, 2005 4:31 pm
Location: NEW JERSEY

Post by 440 CRAWLER » Fri Apr 08, 2005 7:12 pm

HOW MUCH FOR A SET OF TRACKS ?
I NEED TO TAKE A GOOD LOOK AT THE REST OF UNDERCARRIAGE TO SEE WHAT ELSE I REALLY NEED

HOW ABOUT A HYDROLIC ADJUSTER ?

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10937
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Post by Lavoy » Fri Apr 08, 2005 9:51 pm

Pair of rails with new pins and bushings is $1500.
I might have a used adjuster on hand, not sure. If nothing else, I have new replacement adjusters available.
Lavoy

440 CRAWLER
40C crawler
40C crawler
Posts: 24
Joined: Fri Apr 08, 2005 4:31 pm
Location: NEW JERSEY

Post by 440 CRAWLER » Wed Apr 27, 2005 8:03 pm

HOW MUCH FOR REPLACEMENT ADJUSTER ?

HAVE ANY IDEA WHAT IT WOULD COST TO GET RAILS SHIPPED TO NEW JERSEY 07648

THANK YOU

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10937
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Post by Lavoy » Wed Apr 27, 2005 9:59 pm

The new replaement adjusters are around $300 if memory serves. Just sold one to a guy for his 2010, same concept as the 440, just built slightly different. They are good adjusters, in some ways better than original.
Hard to guess on freight, off the cuff guess would be $250 for bare rails, no pads. I get a pretty healthy discount on freight out of here.
I don't normally keep finished rails on hand, I never know what link count someone will want. Should be able to do a set in a couple of weeks.
Lavoy

Post Reply

Who is online

Users browsing this forum: No registered users and 59 guests