I tore into my JD 20 winch today only to find that it was missing parts.
I don't believe it would be prudent to try to rebuild this winch.
Does anyone know of another winch that would work on the 2010?
I would like to have a winch on the machine but all my searches have turned up nothing.
Thanks in advance.
Stretch
Winch for a 2010C
Winch for a 2010C
2010C Dozer, 2010C Loader
If at first you don't succeed, get a bigger hammer.
If at first you don't succeed, get a bigger hammer.
2010 Winch
If I have the numbers wrong, someone let me know...
Hi Stretch,
If I wrote them down correctly; a JD 3310 or 3315 will bolt on and are comparable to a Series 20 winch. Better yet, they don't rust up and fail to work if not used daily.
I have two dead Series 20 winches. Piston rusted and pitted. Probably could get it bored and sleeved, but it would just rust up again. Can't get new parts anymore.
Brian
Hi Stretch,
If I wrote them down correctly; a JD 3310 or 3315 will bolt on and are comparable to a Series 20 winch. Better yet, they don't rust up and fail to work if not used daily.
I have two dead Series 20 winches. Piston rusted and pitted. Probably could get it bored and sleeved, but it would just rust up again. Can't get new parts anymore.
Brian
Who is online
Users browsing this forum: No registered users and 155 guests