There is a lot of play in the main arm where it attaches to the crawler.
Did this blade have bushings between the frame and crawler mount?
Looks to be at least 1/4 inch clerance around pivot pin.
Anyone have a exploded view showing all pins and bushings.
Also how much play should there be between the vertical pins in the blade frame arms.
thanks alabamaed36046
1960 440 IC w 63 blade
-
- MC crawler
- Posts: 4
- Joined: Mon Oct 23, 2006 1:13 pm
- Location: Montgomery, Alabama
Ed,
Brad Kahler on the site was going to have the #63 blade parts list available on CD but haven't heard anything from him lately. Hope everything is OK with him, hopefully just busy with other things.
I have similar issues with my 63.
Chuck
Brad Kahler on the site was going to have the #63 blade parts list available on CD but haven't heard anything from him lately. Hope everything is OK with him, hopefully just busy with other things.
I have similar issues with my 63.
Chuck
1960 440ICD #461094 w/ #63 manual blade Converted to a gas engine two owners ago.
- BKahler
- 440 crawler
- Posts: 175
- Joined: Mon Apr 04, 2005 9:38 pm
- Location: Richmond, Kentucky
- Contact:
Hi Chuck,CELSESSER wrote:Ed,
Brad Kahler on the site was going to have the #63 blade parts list available on CD but haven't heard anything from him lately. Hope everything is OK with him, hopefully just busy with other things.
I have similar issues with my 63.
Chuck
I thought I had replied to you about the 63 parts list. You're right I've been extremely busy. I accepted a job transfer to work in Richmond KY but first I had to transfer to Pasadena CA for 7 to 10 months. I do have the 63 parts list ready to go. Send an email and I'll make arrangements to get the file to you.
Ed, send me an email and I'll explain what I have to offer.
Thanks!
Brad
Who is online
Users browsing this forum: No registered users and 176 guests