440 loader crawler
-
willy wagon
- 40C crawler
- Posts: 17
- Joined: Wed Apr 18, 2007 8:40 pm
440 loader crawler
i have just resealed the lift cylinders on my loader. they were shot. however the loader still creeps down , not as bad but still very anoying, any ideas?
-
FarmLife
- 430 crawler
- Posts: 98
- Joined: Tue Aug 28, 2007 8:55 pm
- Location: Saint Clair, Michigan
- Contact:
The spool valve is not sealing completely, that is the only other place that fluid could be ecaping if the cylinders are good. Ethier it is worn or there is a burr not allowing the valve to close completely but that is where I would look.
1934 GP Beaner
1935 B
1935 AR
1935 AO
1936 B
1936 D
1935 A on skeletons
1937 A w/behlen overdrive
1939 B
1940 B
1941 H
1949 M
1954 40 Standard
1953 60 Regular
1955 70 Std Diesel
1954 80
1946 Lindeman
Phase 1 420
1935 B
1935 AR
1935 AO
1936 B
1936 D
1935 A on skeletons
1937 A w/behlen overdrive
1939 B
1940 B
1941 H
1949 M
1954 40 Standard
1953 60 Regular
1955 70 Std Diesel
1954 80
1946 Lindeman
Phase 1 420
Who is online
Users browsing this forum: No registered users and 152 guests