General help and support for your Lindeman through 2010 John Deere crawler
-
jclem40c
- 40C crawler
- Posts: 19
- Joined: Mon Dec 24, 2007 7:34 pm
- Location: Liberty,NY
Post
by jclem40c » Mon Mar 31, 2008 6:40 pm
Question for the pros which is most everboby except me. I am trying to get the sprokets off my 40c 4 roller and I think they have grown fast to the hubs. Removed the 6 bolts but the line up pins wont let go. Have used heat, hammers and lots of nasty words all to no avail. Any help would be welcomed. Thanks folks
John
-
RANDY Fay
- 430 crawler
- Posts: 91
- Joined: Sat Feb 02, 2008 8:46 pm
- Location: Westfiield Pa.
Post
by RANDY Fay » Mon Mar 31, 2008 6:56 pm
A little bump with a big mall will do the trick have fun Randy
-
catmatt
- 40C crawler
- Posts: 24
- Joined: Wed Apr 04, 2007 6:48 pm
- Location: Pennsylvania
Post
by catmatt » Mon Mar 31, 2008 7:15 pm
I would hit it as hard as I could with a sledge hammer!
Who is online
Users browsing this forum: No registered users and 153 guests