Hello
Got my block back from the machine shop.
They sleeved decked cleaned magnifluxed installed cam bearings.401.82 bones later We need the torque specs for all bolts (head ect)
Did they see me coming or is the price right?
Lavoy P M Me I need both valves and prices
Thanks
Lowboy
P.S. easiest way to load pix from Kodak easy share to this site
Got my 420c block back
- Jimmy in NC
- 440 crawler
- Posts: 164
- Joined: Fri Apr 22, 2005 10:44 pm
- Location: Raleigh - NC
- Jimmy in NC
- 440 crawler
- Posts: 164
- Joined: Fri Apr 22, 2005 10:44 pm
- Location: Raleigh - NC
Sorry for the delay but here are the values requested.
Ok.. according to the service manual SM-2019:
Head bolts 85-90 foot-pounds
Connecting rods 55- 60 foot-pounds
Main Bearings 140 foot-pounds
Flywheel 75-80 foot-pounds
Rocker arm assembly nuts 25-30 foot-pounds
I think that's the main ones you'd be concerned with. Anything else let me know and I'll be glad to look it up .. but I will be out of town for the weekend.
Jimmy in NC
Ok.. according to the service manual SM-2019:
Head bolts 85-90 foot-pounds
Connecting rods 55- 60 foot-pounds
Main Bearings 140 foot-pounds
Flywheel 75-80 foot-pounds
Rocker arm assembly nuts 25-30 foot-pounds
I think that's the main ones you'd be concerned with. Anything else let me know and I'll be glad to look it up .. but I will be out of town for the weekend.
Jimmy in NC
Who is online
Users browsing this forum: No registered users and 96 guests