Original type gauges for 440 IC

[JD440ICD2006]

Who sells the most original looking gauges for the 440 IC? I specifically need an amp and temp gauge. I have a tach and an oil pressure gauge that are JD.
I have seen the many china knock offs with the big round bottom on the needle, no thanks. I am looking for gauges that are reasonably priced and also look more like the originals.

[Lavoy]

Either Deere or Jerry Trycka at Evergreen restorations are the only correct face Dubuque gauges available. Only catch is the original style 430/440 oil pressure gauges are no longer available from any source. Jerry makes up a mechanical gauge that looks right, but you will have to run an oil line to it.
Lavoy

[JD440ICD2006]

Lavoy, thanks for that info!

If the "correct police" don't catch me , I am more comfortable with a mechnical oil gauge than the original electric sending unit. It just seems like there is more room for error with the sending unit set up, maybe I am wrong

[Lavoy]

I think they were okay, I have a replacement oil pressure gauge and sending unit from Deere on the 430W, and it works fine, just looks dorky.
lavoy

[jac]

Check my posting on July15, 2006. I have some of the part numbers for Stewart Warner gauges. They carry a full line of gauges that will work for your machine. They will not have John Deere on the face but the prices are much better than JD prices. I purchased two new gauges and they are very nice.