For you guys with 40Cs or 420Cs with a JD90 loader.....
The crossmember on the loader seems to be in the way. How do you get the hood off without removing the muffler? How do you get the muffler off without removing the hood. Am I missing something on these? Please share your solution to the puzzle or modifications I can make (no holes in the hood, please) to make this easier.
Thanks,
Digger
420 Hood Removal Puzzle
- DiggerLarry
- 440 crawler
- Posts: 133
- Joined: Tue Apr 12, 2005 7:35 am
- Location: Charlotte, NC
- Contact:
- DiggerLarry
- 440 crawler
- Posts: 133
- Joined: Tue Apr 12, 2005 7:35 am
- Location: Charlotte, NC
- Contact:
Lavoy,Lavoy wrote:on a 420 if you have the short stub exhaust pipe, Lavoy
I don't have the short pipe on my 420. It has a homemade stainless exhaust system, including the muffler, on it currently. Do you have the short pipe in stock? Would I be just as well off to cut the stainless pipe above the hood to make my own? If so, do I need the flange in the top end of the pipe for the muffler to bolt to? I have not bought a new muffler but was assuming the 420 muffler was the made similar to the 40 with the flange to mount it.
Thanks for the advise,
Digger
Who is online
Users browsing this forum: No registered users and 86 guests