420 steering clutch

[Johnneypopper]

hey all
ok i got my clutches apart and they are a bit oily but the steel plates and the pressure plate look good there not scuffed or warped but im noot sure the thickness they should be what all should i look for i want to make sure i replace everything i should also Lavoy how much would the upper idler and shaft be and would you have them in stock

[Lavoy]

The steels are about .093, if the fibers are oily, they need to be replaced. I have shafts and idlers on hand, idlers are $150, shafts are $50.
Lavoy