420 gas cylinder compression
- Paul Buhler
- 350 crawler
- Posts: 991
- Joined: Wed May 21, 2008 6:25 pm
- Location: Killington, VT
420 gas cylinder compression
Does anyone know how many pounds of compression a tight 420 gas engine runs? Thanks.
Paul Buhler
Killington, VT
420c 5 roll with 62 blade, FOPS, and Gearmatic 8a winch
Killington, VT
420c 5 roll with 62 blade, FOPS, and Gearmatic 8a winch
- Paul Buhler
- 350 crawler
- Posts: 991
- Joined: Wed May 21, 2008 6:25 pm
- Location: Killington, VT
Thanks, I'm getting 125 and 128. My machine came with a glopped up air cleaner, and it appears that it was run that way for quite a while. I cleaned everything up and tuned the engine to specs, and it seems to be running quite well. I changed the oil yesterday and a lot of carbon bits (no metal) came out with it so I think the machine is on the road to recovery. Paul
Paul Buhler
Killington, VT
420c 5 roll with 62 blade, FOPS, and Gearmatic 8a winch
Killington, VT
420c 5 roll with 62 blade, FOPS, and Gearmatic 8a winch
Who is online
Users browsing this forum: No registered users and 115 guests