I was at the John Deere dealer looking for output shaft shims for my late 440. (Fits between the front bearing and the output, pinion shaft.) Initially I only found the 0.002" shims, M2056T, so I asked him to check the other numbers (discontinued) for any subs. I was prepared to buy 20 0.002" shims to meet my needs @ $0.55 each.
He came up with AT146268, SHIM KIT ASSORTMENT for $11.25. Checking into other parts lists, it works for all 440's and 1010's and early 350's. May work on the earlier transmissions also. I received it Monday, it is a good assortment and fits well.
Transmission output shaft shims
-
- 420 crawler
- Posts: 38
- Joined: Sat Sep 23, 2006 12:20 pm
- Location: Columbus, Ohio
Transmission output shaft shims
1960 440 ICD with 602 blade
1960 440 ICD with 831 bucket
1960 440 ICD with 831 bucket, center throttle
1960 440 ICD with 831 bucket
1960 440 ICD with 831 bucket, center throttle
Who is online
Users browsing this forum: No registered users and 38 guests